GoPro Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Any tips on removing a sticky pad mount ? Changing motorbikes and was wondering whether anyone had a trick to share in removing a mount?
 

·
Administrator
Joined
·
9,784 Posts
three things. fishing line. Knife, a butter Knife, and alcohol. You may heat the knife up, place behind hte mount and pry,, you can take a que tip, dip to the alcohol, and try to get some of it on the pad, key is take your time. what I did to remove off hte glass, I simply applied pressure with the Knife.,
 

·
Administrator
Joined
·
9,784 Posts
heating up can apply stress and crack, the area that is important.
 

·
Administrator
Joined
·
2,895 Posts
I used a hairdryer in the past to heat up the area.
Then, a couple of broken nails later, it was off!
 

·
Administrator
Joined
·
9,784 Posts
Here, I removed mine just like that, the worst thing to do is Rush, and use the wrong tools. if its on something that will scratch, then you will need to find that solution, its 70% or higher rubbing Alocohol. if its on smooth glass , it is just the knife. see the vid how simple it is to do. all I need to do now is wipe with alochol its gone forever.

My hardest thing is editing on a slow end laptop Lol (just kidding)
 

·
Administrator
Joined
·
9,784 Posts
dug this other clip up like so, its done.


 
1 - 8 of 8 Posts
Top