GoPro Forums banner

1 - 9 of 9 Posts

Registered
Joined
4 Posts
Discussion Starter · #1 · (Edited)
Hi,

with my new cam, originally in 1.22, I updated 1.52,

but big problem, the touch screen remains black, no sens, is the 1.52 stable or is there a firmware installation error?

can we install it, manually via windows?

i would try to install it with a new sd card, my old one was corrupted ....

at start-up the red led flashes twice,

Is there any version of a tester?
6809

6810

thanks you for your help 馃槈
 

Administrator
Joined
8,962 Posts
You do not see this? at gopro.com?

6811


Once you get the firmware, do you know the steps to get on the camera
 

Registered
Joined
4 Posts
Discussion Starter · #3 ·
it is already in 1.52, but the screen remains stopped,

I installed it by the sd card, at the root of the card, UP
 

Administrator
Joined
8,962 Posts
Understanding you reloaded firmware:

contact gopro. camera gave.
 

Registered
Joined
4 Posts
Discussion Starter · #5 · (Edited)
I am waiting for my new sd card, my old one is in error, Monday normally,

if it doesn't work i will contact gopro.

thank you,
 

Administrator
Joined
8,962 Posts
sweet, keep us posted
 

Registered
Joined
4 Posts
Discussion Starter · #7 · (Edited)
hi,

I would not miss it ;)

is it possible to format an sd card other than on the main screen? (is desactivate)

via qr code, ubuntu, or windows? to make it compatible with the device

thx
 

Administrator
Joined
8,962 Posts
laptop/Desktop required, SD card slot required:

If you do not have one, then someone next door, or at work, or better yet, a brickstore. Or local library.

Place micro sdxc card to slot card, to card reader. Driver opens, right click, chose format, and uncheck the quck format box, and press enter

32b is 15 minutes 64gb is 30 minutes etc. to fully format
 

Registered
Joined
25 Posts
You should not have to do a Full Format, but if you insist then great, but when i get a new card i check it first by running a CheckDisk (CHKDSK) via the Command Prompt, this will verify the file system integrity of a volume and attempts to fix logical file system errors.

After that, just put the card into the camera and let the camera software format the card to the correct format mode for recording.
 
1 - 9 of 9 Posts
Top