|Topic Review (Newest First)|
|09-03-2015 06:03 AM|
|Fish||Not sure one will have to find the layout on it? I seen a print before #5 	 are two numbers that rang a bell, but looped pin can also play best to have the paperwork to make one,|
|09-03-2015 02:59 AM|
|kenl000||Is there any information as to what the proper cable connections should be? I can bus out the one I have to compare.|
|09-02-2015 02:36 PM|
newer gopro has a loose port yes. older is a much snugger fit.
I get one try it out and find the correct wires o make it work if I gotten one. but since you say you got a bad one post the link up here so we can see exactly the one you got?
|09-02-2015 11:04 AM|
Also, be aware that the usb port on the gopro's are a notoriously weak spot. Make sure you use care with that port because it's possible to dislodge it and damage the board. I agree with Fish that it's probably the incorrect cable. But, failing that, you might want to inspect the usb port for looseness.
|09-02-2015 02:09 AM|
|kenl000||Yes, it is an aftermarket cable so I suspect that you may be correct.|
|09-01-2015 06:34 AM|
|Fish||I used a gopro combo cable by Gopro.com. Are you using an Aftermarket cable, possibly not wired correctly|
|09-01-2015 02:07 AM|
Attaching USB Audio Cable
I've got a Hero 4 Silver with v3.0 firmware. When I attach an USB audio cable the LCD displays turns off. This happens:
a) On any mode whether video or still
b) Happens with or without an external microphone attached
c) The LCD goes blank almost immediately when the USB audio cable is attached.
I can still take videos and the external microphone is being used, but no display.
Is this normal/expected behaviour?